karmaoreo.blogg.se - Airbridge wifi

Airbridge wifi password#

You can make more changes ( including on other pages) or apply the changes now. The Wireless Settings page displays again.Ī pop-up window opens showing the number of changes to be applied. Your settings are saved to be applied later.

To enable and configure a new 5 GHz SSID, select Enabled.įor more information on configuring the 5 GHz SSID settings, see your User Manual.

To change the default 5 GHz SSID or another previously enabled 5G SSID, click Edit.

In the Wireless Settings- Access Point section, do one of the following:.

In the Distance field, enter the approximate distance in kilometers from the AirBridge access point to most WiFi devices.

This scans for neighboring access points. You can disable client limits entirely by selecting the Clients Limits Disable check box. The maximum number applies to all clients connected to all 5 GHz SSIDs on the AirBridge.

You can specify a lower or higher number WiFi clients. In the Client Limits field, enter the maximum number of WiFi clients.īy default, the limit is 32 clients.To limit the number of clients that can connect to the AirBridge, keep Clients Limits enabled.From the Operation Mode menu, select Access Point.

Airbridge wifi password#

If you previously managed the AirBridge through the NETGEAR Insight app or Insight Cloud portal, enter the Insight network password for the Airbridge's Insight location instead of the device password.The Device Status page displays. The user name is admin and the local device password is the one that you created the first time you logged in. Enter the AirBridge user name and local device password.Enter the IP address of your AirBridge.Launch a web browser on a computer that is connected to the same network as the AirBridge or connected directly to the AirBridge with an Ethernet cable.

To configure your AirBridge as an access point: